Table of Contents
Advertisement
Night mode
Turn on the night mode
Press
(Night mode) for about 3 seconds.
"
"
is displayed and
When a call is received during night mode, the unit
will handle the call silently, either by storing the
received fax into memory or by recording the caller's
message.
Night mode allows you to select a block of time
during which the unit will not ring for outside calls
or make sounds when you change the settings.
This feature is useful when you do not want to be
disturbed, for example, while sleeping.
Listening to recorded messages
When new messages are recorded, the
answer) light will flash.
Press
to listen to recorded messages.
After the messages are played back, the following will be
displayed.
To erase the messages, press
To save the messages, press
Printing received fax documents
When new faxes are received, the following will be
displayed.
Press
(Set) 2 times to print fax documents.
Turn off the night mode
Press
(Night mode) for about 3 seconds.
lights on.
(Auto
.
.
Adjusting the volume of a TV
(KX-FKN512)
Preparation: Programming the maker of your TV
1. Press
.
2. Press
(Search button) repeatedly until the
"
" is displayed.
3. Press
2 times.
4. Press
(Search button) repeatedly until the maker of
your TV is displayed.
If you do not want to use this feature, please select
"
".
5. Press
.
6. Press
(Off).
You can select from the following:
This feature may not work with some TV models even if
you select the maker correctly.
This feature cannot be used with TV/VCR combo decks
or PCs with built-in TV tuners.
Some makers have multiple setting choices (for
example, "
" to "
you can operate correctly.
Operation: Adjusting the TV volume
Press
(TV volume) to adjust the TV volume.
Operation: Mute the TV volume
Press
(TV mute) to mute TV volume.
To cancel mute, press
Backside view
Remote control
signal emitter
"). Please choose one which
(TV mute) again.
19
Advertisement
Table of Contents
