Section 12: Off-Season Storage - White 969D Shown Operator's Manual

Blade Control:
Lubricate the pivot points on the blade control handle and the brake cable at least once a
season with light oil. See Figure 11. The blade control must operate freely in both directions.
Wheels:
Lubricate the wheel at least once a season with light oil (or engine oil). Also, if the wheels are removed
for any reason, lubricate the surface of the axle bolt and the inner surface of the wheel with light oil. See Figure
11.
Caster Assembly (960-969 only):
located on the front caster assembly.
Engine:
Follow engine manual for lubrication instructions.

SECTION 12: OFF-SEASON STORAGE

The following steps should be taken to prepare lawn mower for storage.
• Clean and lubricate mower thoroughly as described in the lubrication instructions.
• Refer to engine manual for correct engine storage instructions.
• Coat mower's cutting blade with chassis grease to prevent rusting.
• Follow battery storage instructions on page 16 (Electric Start Units Only).
• Store mower in a dry, clean area. Do not store next to corrosive materials, such as fertilizer.
NOTE:
When storing any type of power equipment in an unventilated or metal storage shed, care should be
taken to rust-proof the equipment. Using a light oil or silicone, coat the equipment, especially cables and all
moving parts.
Grease fittings are provided for easy lubrication of the swivel pins
21