Sagem MDP 2000 X User Manual page 16

User Controls
English ...
16
Using the Remote Control
Power/Standby
Refer to the "Power On/Off the Projector" section on pages
4
11-12.
Re-Sync
Automatically synchronizes the projector to the input source.
4
Volume + / - (Vol+/Vol-)
Increases/decreases speaker volume.
4
Reset
Changes the adjustments and settings to the factory default
4
value.
Hide
Press "Hide" to hide image, press again to restore display of the
4
image.
Keystone /
Adjusts image distortion caused by tilting the projector (±16
4
degrees).
Page Up (Computer mode only)
Use this button to page up. This function is only available
4
when the projector is connected to a computer via an USB cable.
Page Down (Computer mode only)
Use this button to page down. This function is only available
4
when the projector is connected to a computer via an USB cable.
Freeze
Press "Freeze" to pause the screen image.
4
Four Directional Select Keys
Use
4
your selection.
Menu
Press "Menu" to launch the on screen display menu. To exit
4
OSD, press "Menu" again.
Enter
Confirm your selection of items.
4
VGA
Press "VGA" to choose Analog RGB, component and HDTV
4
source.
S-Video
Press "S-Video" to choose S-Video source.
4
to select items or make adjustments to