Maintenance; Troubleshooting - Sagem HL10 User Manual

Table of Contents

Advertisement

C
HOOSING THE STATION SEARCH MODE
The radio has two station search modes:
 Automatic: the stations are found according to the reception quality automatically
detected,
 Manual: the stations are set by means of successive manual jumps of 0.05 MHz in
the chosen band.
To select a station search mode:
In the menu Configuration > Station search, select Manual or Automatic according to
the search mode required.
L
ISTENING TO THE RADIO IN STEREO OR MONO
In the menu Configuration > Audio FM, select Stereo or Mono depending on the
broadcast mode you want and confirm.

MAINTENANCE

Radio
Clean your radio using a soft, lint-free cloth.
Some chemical products may damage the plastic. Do not use spray products,
certain special cleaning products, corrosive products, solvents, alcohols or
detergents, etc.

TROUBLESHOOTING

Problem
You cannot switch on the
radio
Bad quality radio reception
No sound
Radio buttons inactive
Cannot find radio station in
the list
Causes
Mains plug fault
Signal too weak
Volume fault
Radio locked
Bad quality radio reception
during station scanning
10
Solutions
Check that the radio's
power plug is connected
and that the mains plug is
powered.
Find a place where the
signal is stronger.
Unfold the aerial fully.
Adjust the volume.
Lower the HOLD button.
Redo the scan.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hm10

Table of Contents