LG Centric 32LT770H Commercial Mode Setup Manual page 75

41. Tile H Position (Command: d e)
To set the Tile Horizontal position.
*Only available when Tile Natural Mode is off.
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data 00 to 32: Left (-50) to Right (0)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
42. Tile V Position (Command: d f)
To set the Tile Vertical position.
*Only available when Tile Natural Mode is off.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data 0 to 32: Bottom (0) to Top (50)
(*Bottom/Top values depend on Tile V size.)
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
43. Tile H Size (Command: d g)
To set the Tile Horizontal Size.
*Set Tile H Position to 0x32 (50) before setting Tile H
Size.
*Only available when Tile Natural Mode is off.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
44. Tile V Size (Command: d h)
To set the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V
Size.
*Only available when Tile Natural Mode is off.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
45. Natural Mode (In Tile Mode) (Comman : d j)
To set the Tile Natural mode.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
46. FAN Control (Comman : d o)
To set Fan control on/off.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
Data 00: Auto
01: On
02: Manual
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
75