AT&T E2715B User Manual page 45

·Each month clean handset and base charging contacts using a pencil eraser or a cloth to
eliminate deposit accumulation.
·Charge light should come on when handset is cradled in base.
·Charge handset for 16 hours.
Calling in same Area Code
Many LTCO's are changing their dialing sequence to 0 +, or 1 +, 10-digit dialing (0 + 0r
1 + area code + seven-digit phone number) for all long distance calls that are made within
the same area code. All 0 +, or 1 +, 7-digit dialing within the same area code will be
eliminated. This also means that local credit card and operator assistance calls that
traditionally have been 0 + 7 dialed calls will now require 0 + 10 dialing. You will
continue 0 + or 1 + 10 digit dialing for long distance calls into other area codes as you do
today.
Recradle unplug AC
1.Unplug the AC adapter from the wall outlet.
2.Remove battery cover on handset.
3.Unplug batteries from back of handset.
4.Wait 15 seconds and reinstall batteries securely.
5.Replace battery cover.
6.Recradle handset in base, replug AC adapter and wait 15 seconds.
7.Pick up handset and press phone.
NOTE: Be sure batteries have been charged recently.
Recradle unplug AC
1.Unplug the AC adapter from the wall outlet.
2.Remove battery cover on handset.
3.Unplug batteries from back of handset.
4.Wait 15 seconds and reinstall batteries securely.
5.Replace battery cover.
6.Recradle handset in base, replug AC adapter and wait 15 seconds.
7.Pick up handset and press phone.
NOTE: Be sure batteries have been charged recently. If not, charge batteries fully for 16
Hours.
Handset Locked Up (Battery ) :
1.Remove battery cover on handset.
2.Unplug battery from back of handset.
3.Wait 15 seconds.
4.Reinstall battery securely.
5.Replace battery cover.
6.Recradle handset in base for 15 seconds.
7.Pick up handset and press phone.
NOTE: Be sure batteries have been charged recently.
Handset Locked Up (Battery ) :
1.Remove battery cover on handset.
2.Unplug battery from back of handset.
3.Wait 15 seconds.