Dvd Setup; Selecting The Scanning Mode; Setting A Menu - Kenwood M-616DV Instruction Manual

DVD Setup

Selecting the scanning mode

Press to select the video output suitable for the TV.
Press SHIFT and PROGRESSIVE buttons together.
Display
Setting
Component
video
Scanning mode
576I Select this when connecting the TV
which does not support the progressive
scanning.
576P Select this when connecting the
TV compatible with the progressive
scanning to the component input.
⁄
• If you connect the unit and TV with a component video cord,
you can view the picture at a higher resolution than when
connecting with a video cord.
• If your TV does not accept the signal type you selected,
abnormal picture appears on the screen. Please read TV's
owner's manual then set the signal type that your TV can
accept.
• Do not change the scanning mode to progressive in the
following cases;
– When your TV does not support progressive video input.
– When you have not connected your TV to the unit using a
component video cord.
20
M-616DV
"576I" "576P"
720 x 576i 720 x 576p
✔ ✔

Setting a menu

1
Press SHIFT and SET UP buttons together.
2
Press MULTI CONTROL 2 or 3 button to select
the menu.
TV SYSTEM
SCREEN SAV ER
VIDEO
TV TYPE
PASSWORD
RATI NG
DEFAULT
3
Press MULTI CONTROL 5 or ∞ button to select
the item.
4
Press ENTER button.
5
Press MULTI CONTROL 5 or ∞ button to select
the options, and then press ENTER button.