Required for Coca-Cola Freestyle
for Normal Dispenser or Ice Storage Bin Application
Attach the bin control mount and
bin control extension bracket to the
icemaker using the 4 thumbscrews
from the right side of the base case.
Thumbscrews
b) KM-901M_H/3
The bin control is factory installed and ready for use.
Factory Set Bin Control Mount Position
Pump Motor
Wire Harness
Optional Bin Control Mount Position
Remove the 2 thumbscrews
securing the bin control to
the bin control mount.
Remove the 2 thumbscrews
securing the bin control mount to
the bin control extension bracket.
Base Case
Dispenser Application
®
Base Case
Bin Control
Assembly
Thumbscrews
Pull excess bin control
cable to front.
"J" Slot
Frame
Fig. 4
Reattach the bin
control mount to the
bin control extension
bracket as illustrated.
Attach the bin control to the
bin control mount using the
2 thumbscrews.
Thumbscrews
Pump Motor
Wire Harness
Fig. 5
19
Pull excess bin control
cable to front.
"J" Slot
Frame