Service And Repairs - Hitachi N 3804AB2 Instruction And Safety Manual

2. Maintenance chart (See page 24)
3. Operator troubleshooting (See page 25)
4. Storing
When not in use for an extended period, apply a thin coat of the lubricant to the steel
parts to avoid rust.
Do not store the Stapler in a cold weather environment.
Keep the Stapler in a warm area.
When not in use, the Stapler should be stored in a warm and dry place.
Keep out of reach of children.
5. WARNING LABEL
Change the WARNING LABEL if missing or
damaged.
A new WARNING LABEL is available from
a Hitachi authorized service center.
6. Service parts list
A: Item No.
B: Code No.
C: No. Used
D: Remarks
CAUTION:
Repair, modification and inspection of Hitachi Power Tools must be carried out by an
Hitachi Authorized Service Center.
This Parts List will be helpful if presented with the tool to the Hitachi Authorized
Service Center when requesting repair or other maintenance. In the operation and
maintenance of power tools, the safety regulations and standards prescribed in each
country must be observed.
MODIFICATIONS:
Hitachi Power Tools are constantly being improved and modified to incorporate the latest
technological advancements.
Accordingly, some parts (i.e. code numbers and/or design) may be changed without prior
notice.

SERVICE AND REPAIRS

Only service personnel trained by Hitachi, distributor or
employer shall repair the Stapler.
Use only parts supplied or recommended by Hitachi for repair.
All quality Staplers will eventually require servicing or replacement of parts because of
wear from normal use.
NOTE:
Specifications are subject to change without any obligation on the part of HITACHI.
Warning Label
WARNING
English
23