Flash Mode
The Flash is used to illuminate a subject in low light
or for fill-in lighting to achieve better illumination
of a subject with pronounced shadows.
1. Pop up the flash manually as shown below.
2. Press the right arrow button
Flash Settings Menu.
3. Press the left/right to select the following 5
modes:
to enter the
Flash Auto
•
Flash Auto
Camera flash goes off automatically
based on existing light conditions.
•
Force Flash
The flash will engage with each shot
even if there is enough available light
to take the photo without flash.
•
Slow Sync.
This allows for night scenery
photos that include people in the
foreground. The use of a tripod is
recommended when shooting with
this setting.
•
Slow Sync. + Red-Eye
Use this mode for slow synchro shots
with red-eye reduction.
•
Red-Eye Reduction
The camera emits a brief pre-flash
before the picture is taken to reduce
red-eye effects.
4. Press the
button to confirm the settings
and exit the option.
43