Wall-Mount Adjustment (La40R8, La40M8, La46M8, La52M8) (Sold Separately) - Samsung LA32R8 Owner's Instructions Manual

Wall-mount adjustment (la0r8, la0m8, lam8, lam8)
once the wall mount is installed, the position of your tV can be easily adjustable.
tV rear Panel
. Press the menu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
enter/oK button.
. Press the ▲ or ▼ button to select "Wall-Mount Adjustment",
then press the enter/oK button.
. Adjust to the desired position using the ▲,▼,◄,► buttons.
. Press the exit button to exit.
If you press an arrow button when no OSD is displayed on the
TV screen, the Adjustment screen appears.
When you turn the power off, your TV moves to the initial
installation position.
When you turn the power on, your TV moves to the last
remembered position you adjusted.
The auto wall mount will not work when Anynet+ is operating.
Light Effect is only for LA40R8
using the remote Control buttons
button
green
button
red
button
For installation, refer to the Installation Manual provided.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer
BN68-01180C-00Eng-0911.indd 56
SerViCe Cable (not supplied)
operations
Wall-mount angle
Tilt Up, Tilt Down, Move right, Move left
adjustment
Reset Moves to the initial installation position
Remembering the 1. Select the Direction buttons of the remote control.
2. Press the red button (Select Position 1).
position and
3. Adjust the set to a desired position following the wall mount owner's
moving to the
remembered
yellow
4. The position you adjusted last is memorized as Position 1.
button position
5. By using the green button (Select Position 2) and the yellow button
6. You can save 3 respective positions. To the red button (Select
7. If you additionally move the set from a saved position, the last
english - 
auto Wall-mount
tV
Position
Position
adjust
manual.
(Select Position 3), you can save positions according to the
procedures above.
Position 1), green button (Select Position 2) and yellow button
(Select Position 3). If you press a button after saving, the set
automatically moves to that saved angle.
position is saved.
(Sold separately)
Setup
rmore
Wall-mount adjustment

energy Saving : off

hdmi black level : normal

PiP 
move enter return
Wall mount adjusment
  
Center exit
inFo
2007-09-11 3:17:45