General Control - Sharp QT-V5H Operation Manual

General control

Some of these functions are only available on the remote control.
" To change the display brightness (3 levels)
You can switch the display brightness by pressing the DIMMER button.
Each time the button is pressed, the display brightness changes in the following order.
Brightened OFF
" Adjusting the volume
Press the VOLUME + button to increase the volume and the
VOLUME - button to decrease the volume.
You can also use the VOLUME + or VOLUME - button on the
main unit.
" Emphasising the bass
1
Press the SOUND MODE button repeatedly to select "XBS OFF".
2
Within 5 seconds, press the or button to select "XBS ON".
Increase
To cancel, select "XBS OFF".
" Setting surround effects
1
Press the SOUND MODE button repeatedly to select "SUR OFF".
2
Within 5 seconds, press the
To cancel the surround, select "SUR OFF".
" Changing the sound quality
1
Press the SOUND MODE button repeatedly to select "FLAT".
2
Within 5 seconds, press the
sound quality "FLAT", "CUSTOM", "ROCK", "POP", "JAZZ" or
"CLASSIC".
FLAT
Dimmed
FLAT :
CUSTOM : Customise the bass and treble levels.
When "CUSTOM" is selected in step 2, you can adjust the bass and
treble.
1 Press the
2 Within 5 seconds, press the
00 01 31 32
Unchanged
04/6/14
or button to select "SUR ON".
or button to select the desired
CUSTOM ROCK POP JAZZ
The sound is not modified.
or button to select "TREB", or "BASS".
or button to adjust the treble or the bass.
-7 7
QT-V5H_SEEG_E2.fm
QT-V5H
ENGLISH
CLASSIC
-7 7
E-12
9HX80432100007
D
F
S
V
I
N
P
E