Setting Up Anynet; Press The Enter/Ok Button; Press The ▲ Or ▼ Button To Select Off, Then Press The Enter/Ok Button - Samsung LA40F81BD Owner's Instructions Manual

Setting Up Anynet+

The following settings help set the Anynet+ functions.
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the
ENTER/OK button.
2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC)
Setup, then press the ENTER/OK button.
3 Press the ENTER/OK button to select Anynet+ (HDMI-
CEC) Setup, then press the ENTER/OK button.
4 Press the ▲ or ▼ button to select On, then press the
ENTER/OK button.
➢
The Anynet+ function is enabled.
➢
If you select Off, Anynet+ is disabled.
➢
When the Anynet+ (HDMI-CEC) function is disabled, all
the Anynet+ related operations are deactivated.
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
3 Press the ▲ or ▼ button to select Auto Turn Off, then

press the ENTER/OK button.

4 Press the ▲ or ▼ button to select On, then press the
ENTER/OK button.
➢
The Auto Turn Off function is enabled.
➢
If you select Off, the Auto Turn Off function is
cancelled.
Press the EXIT button to exit.
➢
The active source on the TV remote must be set to TV to use the Anynet+ function.
➢
If you set the Anynet+ (HDMI-CEC) to On, the Device List menu appears when you press the TOOLS
button on the remote control.
➢
If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned
off. However, if the device is recording, it may not be turned off.
Anynet+ (HDMI-CEC)
Auto Turn Off
Anynet+ (HDMI-CEC)
Auto Turn Off
English - 64
Blue Screen :Off
Melody :Medium
Anynet+ (HDMI-CEC) Setup
SW Upgrade
Function Help : On
Anynet+ (HDMI-CEC) Setup
: ON
Off
:
On
Move Enter Return
Anynet+ (HDMI-CEC) Setup
: On
Off
:
On
Move Enter Return
