Support Menu; Advanced Features; Software Upgrade; Self Diagnosis - Samsung LCD TV User Manual

Advanced Features

Picture In Picture (PIP)
¦
PIP
t
Watches simultaneously the TV tuner and one external video
source. PIP (Picture-in-Picture) does not function in the same
mode.
✎
NOTE
x
If you turn the TV off while watching in
PIP window will disappear.
x
You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
x
PIP settings
Main picture
Component1, Component2,
HDMI1/DVI, HDMI2, HDMI3,
HDMI4, PC
PIP (Off / On) : Activate or deactivate the PIP function.
■
: Select the channel for the sub-screen.
Channel
■
Õ / à / À / Œ): Select a size for the sub-
Size (
■
picture.
Position ( à / – / — / œ): Select a position for the
■
sub-picture.
✎
In Double ( À, Œ) mode, Position cannot be
selected.
Sound Select (Main / Sub)
■
desired sound (Main / Sub) in PIP mode.

Support Menu

Self Diagnosis

Self Diagnostic might take few seconds, this is part of the
normal operation of the TV.
Picture Test (Yes / No)
■
problems and if the problem continues to occur check
the colour pattern.
Sound Test (Yes / No)
■
check for sound problems.
✎
If you hear no sound from the TV's speakers,
before performing the sound test, make sure
Speaker Select is set to TV speaker in the
Sound menu.
✎
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the
24
English
PIP mode, the
Sub picture
TV
: You can choose the
: Use to check for picture
: Use the built-in melody sound to
button.
MUTE
: (digital channels only) HDTV
Signal Information
■
channel's reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
Troubleshooting : If the TV seems to have a problem,
■
refer to this description.
✎
If none of these troubleshooting tips apply, contact
the Samsung customer service centre.

Software Upgrade

Software Upgrade can be performed via a broadcasting
signal or by downloading the latest firmware from samsung.
com to a USB memory device.
Current Version the software already installed in the TV.
✎
Software is represented as "Year/Month/Day_Version".
Software Upgrade
Current Version
By USB
By Online
By Channel
Standby Mode Upgrade : 2 hours later
Alternative Software
Installing the Latest Version
By USB : Insert a USB drive
■
containing the firmware
upgrade file, downloaded from
www.samsung.com, into the
TV. Please be careful not to
disconnect the power or remove
the USB drive until upgrades
are complete. The TV will be
turned off and on automatically
after completing the firmware
upgrade. When software is
upgraded, video and audio settings you have made will
return to their default settings. We advise you to to write
down your settings so that you can easily reset them
after the upgrade.
: Upgrade the software using the Internet.
By Online
■
✎
First, configure your network. For detailed
procedures on using the Network Setup, refer to
the "Network Connection" instructions.
✎
If the internet connection doesn't operate properly,
the connection may be broken. Please retry
downloading. If the problem persists, download by
USB and upgrade.
2010/01/18_000001
►
----/--/--_------
U Move E Enter R Return
TV Side Panel
or
USB Drive