Getting Started - Samsung Plasma TV User Manual

Getting Started

Accessories
• Remote Control (AA59-00600A) & Batteries (AAA x 2)
• Warranty Card / Safety Guide
• Owner's Instructions
• Power Cord
• Cleaning Cloth (BN63-01798B)
Input Cables (Sold Separately)
• RS232 (AA39-00311A)
• Audio
• HDMI
• HDMI-DVI
✎
Check the cable before plug-in
Cable
HDMI
USB
Optical
Do not plug cable upside down.
Be sure to check before plug-in.
TV Controller (Panel Key)
Function menu
MEDIA.P
m R
P
Return
TV Controller
Remote control sensor
Turns the TV on by pressing the controller in standby
Power on
mode.
Adjusts the volume by moving the controller from side to
Adjusting the volume
side when the power is on.
Selects a channel by moving the controller up and down
Selecting a channel
when the power is on.
Press the controller when the power is on, then the
Using the function menu function menu screen appears. If you press it again, the
function menu screen disappears.
Selects the MEDIA.P by moving the controller in the
Selecting the Media Play function menu screen. The Media Play main screen
appears.
Selects the MENU(m) by moving the controller in the
Selecting the MENU (m) function menu screen. The OSD(On Screen Display) of your
TV's feature appears.
Selects the Source List(s) by moving the controller
Selecting the Source
in the function menu screen. The Source List screen
List (s)
appears.
Selects the Power Off (P) to turn the TV off by moving
Power Off (P)
the controller in the function menu screen.
• Component
• Composite (AV)
• Coaxial (RF)
Ports
✎
Exits the menu when pressing the controller more than 1 second.
✎
When selecting the function by moving the controller to the up/down/left/
right directions, be sure not to press the controller. If you press it first, you
cannot operate it to move the up/down/left/right directions.
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of on-screen
prompts will assist in configuring basic settings. Press the
Plug & Play is available only when the Input source is set to TV.
✎
Connecting the power cord and antenna. (refer to 'Connections')
Selecting a language
Plug & Play
Select Language of the OSD.
English

 Español
Language
Français
U Move
Selecting a Home Use mode
Plug & Play
Select 'Home Use' when installing this TV in your home.
Store Demo Home Use
L Move
Selecting an antenna
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Auto


U Move E Enter
Setting the Clock Mode
Plug & Play
Set the Clock Mode.


Clock Mode : Auto


E Enter
Viewing the HD Connection Guide
The connection method for the best HD screen quality is displayed.
ENTERE
Press the button.
- 2 -
Select the desired OSD (On Screen
Display) language.
E Enter



• Select the Home Use mode.
Store Demo mode is for retail
environments.

• When pressing TV controller, the

function menu screen appears.
Select the MENU(m) and press
E Enter

it more than 5 seconds using the

controller. The Store Demo mode
is set. Cancel the Store Demo by
selecting Source List(s) and
pressing it more than 5 seconds.

In Cable mode, you can select the
correct signal source among STD,
HRC, and IRC by pressing the ▲, ▼,
Start
◄ or ► button.
Start
Start


m Skip

Set the Clock Mode automatically or
manually.
• If you select the Auto, set the
DST(Daylight Saving Time).
• On the DST screen, press
ENTERE, then select whether to
turn DST (Daylight Savings Time) on
m Skip
or off. Select the time zone where
you live.


Enjoy your TV.
button.
POWER