Wall-Mount Adjustment (Sold separately)
Once the auto wall mount is installed, the position of your TV can be easily adjusted.
Rear Panel
Serial Cable(1P to 1P)(Not supplied)
Entering the menu
1
Press the ▲, ▼, ◄ or ► button on your remote control.
➢
The Wall Mount Adjustment screen is displayed.
➢
If the Wall Mount Adjustment screen is not displayed
when clicking on a direction button while watching your
TV, use the menu to display that screen.
• Press the MENU button to display the menu. Press
the ▲ or ▼ button to select Setup, then press the
ENTER button.
• Press the ▲ or ▼ button to select Wall-Mount
Adjustment, then press the ENTER button.
Remembering the Position
Adjust to the desired position using the ▲, ▼, ◄, ►
buttons.
➢
If you press an arrow button when no OSD is displayed
on the TV screen, the Adjustment screen appears.
➢
Press the INFO button to reset. Press the ◄ or ►
button to select Yes, then press the ENTER button.
The position is initialized to the default setting.
Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from
either Position1, Position or Position in order to save
the current position.
➢
To not save the current position, press the RETURN
button.
➢
When selecting a save mode, you cannot use the
Color buttons.
4
Press the ENTER button to save.
➢
When Position1 is selected, the message Current
position saved as Position1 is displayed.
5
Press the ENTER button.
➢
The saved Position appears on the left side of the OSD.
English - 5
Auto Wall-Mount
Preference
Light Effect
: Watching TV
Wall-Mount Adjustment
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
Software Upgrade
: Off
Wall-Mount Adjustment
►
►
►
►
Position
1
Adjust
Save
Save
Select a mode to Save.
Position1
Position2
Position3
Move
Enter
►
2
3
Center
Return
Continued...