Getting Started
✎
Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer.
✎
The items' colour and shapes may vary depending on the models.
y Remote Control & Batteries (AAA x 2)
y Owner's Instructions
y Warranty Card / Safety Guide (Not available in some locations)
y Blanking Bracket
✎
Ferrite Core: The ferrite cores are used to shield the cables from interference. When
connecting a cable, open the ferrite core and clip it around the cable near the plug as
shown in the figure.
x
A (Distance between the ferrite core and one end of the cord put into the TV set):
100 ~150mm
x
B (Distance between the ferrite core and the other end of the cord put into the
outlet): below 15mm
✎
The product colour and shape may vary depending on the model.
Speakers
Remote control sensor
SOURCEE
MENU
Y
z
Power Indicator
P (Power)
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
4
English
Accessories
y Cleaning Cloth
y Power Cord
y Cable Tie
Viewing the Control Panel
Aim the remote control towards this spot on the TV.
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
Displays an on-screen menu, the OSD (on screen display), of your TV's features.
Adjusts the volume. In the OSD, use the Y buttons as you would use the ◄
and ► buttons on the remote control.
Changes the channels. In the OSD, use the z buttons as you would use the
▼ and ▲ buttons on the remote control.
Blinks and turns off when the power is on and lights up in standby mode.
Turns the TV on or off.
y Ferrite Core for
Power Cord (2EA)
A
Remote control sensor
y Ferrite Core for
LAN Cable (1EA)
B
Power Indicator