Listening To A Cassette; Cd Synchro Record Feature; Recording A Compact Disc - Samsung MAX-X55 Instruction Manual

Listening to a Cassette

Always treat your cassettes with care; refer, if necessary, to
the section entitled "Precautions When Using Audio Cassettes"
on page 25.
1
Switch the system on by pressing the STANDBY/ON button.
2
Select the TAPE function by pressing TAPE on the front panel.
3
Open either cassette TAPE1 or 2 by pushing and releasing the Tape
cover where PUSH EJECT ( ) is written.
4
Insert the pre-recorded cassette with the open edge of the tape
facing downward.
5
Close the Tape by pushing on it until it clicks into place.
Result: Depending on the Tape selected, the 1 or 2 indication is
displayed in front of the counter number.
6
If you have inserted two cassettes, press TAPE1/2 on the front panel
or directly the TAPE1/2 button on the remote control to select the
cassette to be played.
Result: Depending on the Tape selected, the TAPE 1 or TAPE 2
indication is displayed.
7
FOR MAX-X55/X56/X57
To listen to...
Side A,B
Result: The cassette starts playing.
FOR MAX-X65/X66
To listen to...
Side A TAPE ( ) once
Side B TAPE ( ) twice
Result: The cassette starts playing.
When the cassette is stopped, select one of the following functions
as required or on the remote control.
8
Main Unit
To...
Rewind the cassette
Fast-forward the cassette
Remote Control
To...
Rewind the cassette
Fast-forward the cassette
9
To...
Stop the playback
8
6
1
9
Press ...
TAPE ( )
Press ...
DECK 1 and DECK 2
DECK 2 Only
Press...
Press ...
Press ...
8
2,7

CD Synchro Record Feature

You can record a compact disc on a cassette in two different ways:
Synchronize recording
Direct recording
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
Switch the system on by pressing STANDBY/ON.
2
Insert a blank cassette in TAPE2.
3
Select the CD function by pressing MP3-CD/CD on the front panel.
4
Load a compact disc.
5
Select the required disc.
6
Select the required track and press CD SYNC. or press CD SYNC.
directly to start recording at the beginning of the disc.
Result: REC and SYNC are displayed and recording starts.
7
To stop recording, press .
1
3

Recording a Compact Disc

The direct recording mode enables you to start recording with
any track on the compact disc.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
1
Switch your system on by pressing STANDBY/ON.
2
Insert a blank cassette in TAPE2.
3
Select the CD function by pressing MP3-CD/CD on the front panel.
4 Load the compact disc.
5
Select the required disc.
6
Select the required track on the compact disc and press
panel or on the remote control to set the compact disc player to Pause
mode.
7
Press the REC/PAUSE.
Result: REC is displayed.
8
Press the to start playing the track.
Result: The track is recorded on the cassette.
9
To stop recording, press .
1
3,6,8
7
6
on the front
9
7
19
GB