Connecting And Preparing Your Tv Checking Parts; Using The Stand-Base; Assembling The Cables - Samsung Plasma TV User Manual

Connecting and Preparing Your TV
Checking Parts
Owner's Remote Control/
Instructions AAA Batteries
Screw (4ea) Cover-Bottom
PS50B650 only PS50B650 only
The ferrite core is used to shield the cable from interference. When connecting a cable, open the
N
ferrite core and clip it around the cable near the plug.

Using the Stand-Base

Two or more people should carry the PDP. Never lay the PDP on the floor
N
because of possible damage to the screen. Always keep the PDP upright.
The PDP can rotate 20 degrees in right and left directions.
N

Assembling the Cables

Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent
stand.
Power Cord
(2ea)
Cover-Bottom /
Screws (2ea)
PS63B680 only
Cloth-Clean Warranty Card/
Safety Guide
Manual
(Not available in all
locations)
Holder-Ring (4ea) Ferrite Core for
(Refer to page Power Cord
66)
English - 4
Program CD
Ferrite Core for Holder-Wire
Headphone Cable
-20° ~ 20°