Jabra PRO 920 User Manual page 24

1 Start setup mode
• Put on the headset.
• simultaneously press and hold both headset
volume buttons until the voice prompt says
"setup" and then release the buttons.
2 Setup mode
• the headset buttons are used to cycle through the settings and values.
• the base lights
selected.
Settings
Cycle
through
settings
Base Voice
light prompt
flash x1
flash x2
flash x3
flash x4
flash x5
,or voice prompts are used to indicate which setting and value is currently
Setting
Mute reminder
tone
Ringtone
audio
protection
Wireless range
auto sleep
mode
start
setup
Values
Cycle
through
values
Base Voice
light prompt
setUP
Value
On (default)
Off
Ringtone 1
(default)
Ringtone 2
Ringtone 3
Ringtone 4
Ringtone 5
Peakstop (default)
Peakstop and
Intellitone
normal range
(default)
Low range
Very low range
Off (default)
On
25