Software Upgrade - Samsung LED TV User Manual

Sound Test

If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound
through the TV.
If you hear no sound from the TV's speakers, before performing the sound test, make sure Speaker Select is set to TV
N
speaker in the Sound menu.
The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing
N
the MUTE button.
● Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with
the TV. Contact Samsung's call center for assistance.
● No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check
your connections. If the problem still persists, refer to the external device's user manual.
Signal Information (digital channels only)

Unlike analogue channels, which can vary in reception quality from 'snowy' to clear, digital (HDTV) channels have either perfect
reception quality or you will not receive them at all. So, unlike analogue channels, you cannot fine tune a digital channel. You can,
however, adjust your antenna to improve the reception of available digital channels.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.
N
Continue to adjust the antenna until you find the best position with the strongest signal.

Software Upgrade

❑
To keep your product up-to-date with new Digital Television features then software upgrades
are periodically broadcast as part of the normal Television signal. It will automatically detect
these signals and display the software upgrade banner. You are given the option to install the
upgrade.
Current Version shows version of the software being installed in the TV.
N
Alternative Software shows the previous version that can be replaced.
N
Software is represented as 'Year/Month/Day_Version'. The more recent the date, the
N
newer the software version. Installing the latest version is recommended.
By USB

Insert a USB drive containing the firmware upgrade into TV. Please be careful to not
disconnect the power or remove the USB drive while upgrades are being applied. The TV
will turn off and turn on automatically after completing the firmware upgrade. Please check
the firmware version after the upgrades are complete. When software is upgraded, video and
audio settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the
upgrade.
By Channel

Upgrades the software using the broadcasting signal.
If the function is selected during the software transmission period, this function searches for available software and downloads
N
the software.
The time required to download the software is determined by the signal status.
N
Standby Mode Upgrade

To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering standby
mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on
slightly for the LED product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.
Alternative Software

If Alternative Software is existing, this menu will be activated. You can change the software to previous version.
If software was changed, existing software is displayed.
N
You can change current software to alternative software by 'Alternative Software'.
N
HD Connection Guide
❑
This menu presents the connection method that provides the optimal quality for the HD TV.
Refer to this information when connecting external devices to the TV.
Contact Samsung
❑
View this information when your TV does not work properly or when you want to upgrade the software.
You can view the information regarding the call center, product and software file download method.
English - 
or
TV Side Panel
USB Drive
Software Upgrade
Current Version 2009/01/16_000001
By USB
BY Channel
Standby Mode Upgrade : 45Min
Alternative Software 2009/01/15_000000
U Move E Enter R Return