Connections; Connecting The Speakers; Connecting The Led Cables - Samsung MX-C830D User Manual

Connections

Before moving or installing the product, be sure to
turn off the power and disconnect the power cord.

Connecting the Speakers

Speaker (R)
Position of the product
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times
the distance of the TV's screen size away from the TV.
Example : For 32" TV's 6.56 ~ 7.87 feet (2~2.4 m)
For 55" TV's 11.5 ~ 13.1 feet (3.5~4 m)
Place these speakers in front of
your listening position, facing
Front Speakers
inwards (about 45°) toward you.
ei Place the speakers so that their
tweeters will be at the same
height as your ear.
!
CAUTION
`
Do not let children play with or near the speakers.
They could get hurt if the speaker falls.
`
When connecting the speaker wires to the
speakers, make sure that the polarity (+/ –) is
correct.
✎
NOTE
`
If you place a speaker near your TV set, screen
color may be distorted because of the magnetic
field generated by the speaker. If this occurs,
place the speaker away from your TV set.

Connecting the LeD cables

Connect the LED cables of the Front Speakers
to each LED Terminals of the system.
`
You can enjoy the special light effect on your
speakers.
12
English
RADIO ANT
FM AM
FRONT
LED
SPEAKERS OUT
(IMPEDANCE3Ω )
Speaker (L)
R L
※Use the cable tie on the rear panel so that the LED
cables are not loose.
1. Place the LED cables on the cable tie of the rear
panel.
2.
Press the cap on the cable tie to reveal the hole.
Cable tie
3. Bend the end of the cable tie and put it into the
hole to tighten up.
RADIO ANT
FM AM
Speaker
FRONT
LED
Speaker
SPEAKERS OUT
)
(IMPEDANCE3Ω
R L
RADIO ANT
FM AM
FRONT
LED
SPEAKERS OUT
)
(IMPEDANCE3Ω
R L
Rear panel