AXIS M1054 Network Camera
Hardware Overview
Hardware Overview
1
Lens with Status LED indicator
2
Microphone
3
Light (white illumination LED)
4
PIR sensor
5
Speaker
6
Network connector (RJ-45)
7
Lock ring
8
Part number (P/N) & Serial number (S/N)
9
Power connector
10 I/O terminal connector
11 Control button
12 Power LED indicator
13 Network LED indicator
14 Wireless LED indicator (activated on wireless models only)
Connectors
For technical specifications, see page 52.
Network connector - RJ45 Ethernet connector. Supports Power over Ethernet (PoE).
NOTICE
NOTICE
NOTICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network switch
shall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded. For
information about regulatory requirements, see Regulatory Information, on page 2 .
Control button - The control button is used for:
•
Resetting the product to factory default settings. See page 47.
Connecting to an AXIS Video Hosting System service. See page 41. To connect, press and hold the button for
•
about 1 second until the Status LED flashes green.
6