Console Password; Reset Certificates - Avocent DSR 1024 Installer/User Manual

To rename a user in the DSR10241024 switch database:
1. From the Console Main menu, type
menu option.
2. Type and press
1
within the database appears.
3. Type .
E
4. At the prompt, enter the number of the user you wish to rename and then press
5. Type a new username and press
6. Enter the password for the user.
7. Re-enter the password to confirm it.
8. Enter (zero) to exit.
0
To remove a user from the DSR10241024 switch database:
1. From the Console Main menu, type
menu option.
2. Type and press
1
within the database appears.
3. Type .
D
4. At the prompt, enter the number of the user you wish to delete and then press
5. At the prompt, type
6. Press
Enter
7. Enter (zero) to exit.
0

Console Password

If this is enabled, the user must log in to access to the switch's Console Main menu.

Reset Certificates

This menu option enables you to clear the certificate sent by the DSView 3 software to the
DSR1024 switch.
When a DSR10241024 switch is added to a server running DSView 3 software, a certificate
automatically downloads from that server to the DSR1024 switch. That certificate is replicated
across all servers running DSView 3 software operating in a predefined system. Thereafter, any of
the servers in that system will be able to communicate with the
DSR1024 switch.
to access the Local User Accounts menu option. A list of users already
Enter
Enter
to access the Local User Accounts menu option. A list of users already
Enter
to confirm deletion of the user from the DSR10241024 switch database.
Y
to remove the user.
and press to access the Security Configuration
2 Enter
.
and press to access the Security Configuration
2 Enter
Chapter 5: Terminal Operations
Enter
Enter
49
.
.