Download Print this page

Advertisement

Quick Links

OWNER'S MANUAL
KXB200H/HR BASS GUITAR AMPLIFIER
KXB200H
KXB200
KXB200
Congratulations on the purchase of your new Kustom bass amplifier.
Your KXB Model draws on decades of amp design and manufacturing
experience at Kustom. This model was built from the ground up to offer
world-class tone, useful features and reliable performance. Inside this manual,
you'll find valuable information about the amp's controls and specifications.
Being familiar with its features will help you effectively dial in different tones.
We wish you many years of enjoyment with your Kustom amplifier.
kustom.com

Advertisement

loading

Summary of Contents for Kustom KXB200H

  • Page 1 Congratulations on the purchase of your new Kustom bass amplifier. Your KXB Model draws on decades of amp design and manufacturing experience at Kustom. This model was built from the ground up to offer world-class tone, useful features and reliable performance. Inside this manual, you’ll find valuable information about the amp’s controls and specifications.
  • Page 2: Fcc Statements

    FCC Statements 1. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3 ENGLISH kustom.com...
  • Page 4 FRENCH kustom.com...
  • Page 5 KXB200H/HR Control Panel KXB200 1. 0 dB Input: ¼-inch input that is intended for bass guitars with standard, passive electronics. 2. –6 dB Input: ¼-inch input that is optimized for bass guitars with active electronics. 3. Gain: Controls the input level to the preamp. Set so Clip indicator light is not lit, otherwise distortion may occur.
  • Page 6 KXB200H/HR Back Panel KXB200H HR Speaker Outputs: These are two-conductor, ¼-inch external speaker jacks. These jacks are wired in a parallel configuration. Use them to connect the amplifier head to speaker cabinets with a minimum total impedance of 4 ohms.
  • Page 7 KXB200H/HR AC Mains kustom.com...
  • Page 8 KXB200H/HR Suggested Settings The following suggested settings will help you dial in a variety of popular tones. Keep in mind, these are starting points to get you up and running with your KXB amplifier. Feel free to experiment to achieve your own signature sounds.
  • Page 9 Kustom KXB200H/HR Specifications ® Output Power 200 Watts 4 Ohms at 5% THD+N Input Impedance Dual Input 0 dB: 500K Ohm, -6dB: 95K Ohm Gain 75 dB Gain and Master at Max, All EQ at 12 o’clock S/N Ratio -80 dB typical...
  • Page 10 KXB200H/HR Signal Flow Diagram kustom.com...
  • Page 11 KXB200H/HR 19 November 2009 kustom.com...
  • Page 12 Kustom Amplification, Inc. 3015 Kustom Drive Hebron, Kentucky USA 41048 888-4-KUSTOM (888-458-7866) All specifications are subject to change without prior notice. ©2010 Kustom...

This manual is also suitable for:

Kxb200hr