Combination Lock Set Up Instruction - Impex ADI-10250-I Owner's Manual

Combination Lock Set Up Instruction

Turn the dials to the combination numbers you have set and then pull up the shackle to open the
Lock.
The Lock is set at the manufacturer to open at 0-0-0 (all zeros are positioned on the straight
line).
It is recommended to change the combination to ensure safety.
Please follow the below steps to change the combination:
1. Turn the dials to 0-0-0. Pull up the shackle and turn it to the direction shown in the below
diagram.
2. Press down the shackle, and turn each dial to the number you want to set.
3. Pull up the shackle, swing back and press down into the hole to set up the new
combination.
©IMPEX INC.
12
www.impex-fitness.com