Channels; Storing Channels Automatically - Samsung COLOUR TELEVISION Owner's Instructions Manual

ENG
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Sort
Select Enter
Auto store
Country : Others
: - /+
Search
Select Adjust
Auto store
Country : Others
: - /+
Search
Select Search
P 1 C-- -----
106 MHz
Exit
Sort
From
To
Store
Select Adjust

Storing Channels Automatically

‹ ‹
‹ ‹
‹ ‹
‹ ‹
‹ ‹
‹ ‹
Exit
Exit
Exit
%
7
: P 1 -----
: P-- -----
: ?
Exit
12
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1
Press the MENU button.
Result: The main menu is displayed.
2
Press the or
Result: The options available in the Channel group are
displayed.
- +
3
Press the or button.
Result: The Auto store is selected.
- +
4
Press the or button again.
Result: The options available in the Auto store group are
displayed with Country is selected.
5
Select your country by pressing the
are displayed in the following order: Others - Belgie -
Deutschland - España - France - Italia - Nederland -
Schweiz - Sverige - UK - East Europe.
6
Press the or
- +
7
Press the or button to start the search.
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
To stop the search before it has finished, press the MENU
button.
8
When searching and storing are complete, the Sort menu is
displayed.
To sort the stored channels into the desired numerical order,
go to Step 6 of the "Sorting the Stored Channels" procedure
on page 13.
To exit from the channel store function without sorting the
channels, press the MENU button repeatedly until the menus
disappear.
9
When the channels have been stored, you can:
Sort them in the order required (refer to page 13)
Assign a name to the stored channels (refer to page 16)
Clear a channel (refer to page 17)
Fine tune channel reception if necessary (refer to page 18)
Activate the Digital Noise Reduction feature (refer to page 21)
button to select Channel.
- +
or button. The countries
button to select Search.