Wheel And Deck Zerks; Front Wheel Mount; Front Wheel Bearings; Deck Spindle - Husqvarna PZ60 Operator's Manual

Wheel and Deck Zerks

Use only good quality bearing grease.
Grease from well-known brand names (petrochemical
companies, etc.) usually maintains a good quality.

Front Wheel Mount

Remove dust cap to expose zerk. Lubricate with a
grease gun until the grease is forced out around the
top washer.

Front Wheel Bearings

Lubricate 3-4 strokes with a grease gun on each set of
wheel bearings.
Deck Spindles
Lower the cutting deck completely.
If a grease gun without rubber hose is used, the foot
plate must be removed to lubricate the center spindle.
Lubricate with a grease gun, 2-3 strokes per spindle.
LUBRICATION
Lubricating front wheels
Outer deck spindle
Center spindle, with foot plate removed
8065-032
8065-199
8065-200
51 51