1. Manuals
  2. Brands
  3. Infinity Manuals
  4. Subwoofer
  5. Kappa 120.9w
  6. Brochure & specs

Infinity Kappa 100.9w Brochure & Specs

Hide thumbs Also See for Kappa 100.9w:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

See also: User Manual
K
A
P
P A
®
100.9w
120.9w

Advertisement

Table of Contents
loading

Related Manuals for Infinity Kappa 100.9w

Summary of Contents for Infinity Kappa 100.9w

  • Page 1 ® 100.9w 120.9w...

  • Page 2: Box Contents

    (1) Owner’s manual levels achievable by Infinity speakers when frequencies below 80Hz will be boosted variety of enclosure types to produce (1) Technical data sheet...

  • Page 3: Subwoofer Enclosure Types

    • The in-vehicle performance will have Sealed-enclosure construction is straight- The air trapped inside a sealed enclosure Kappa 100.9w and 120.9w subwoofers are the flattest overall frequency response. forward and forgiving of errors in volume is compressed when the subwoofer designed to perform best in moderately calculation, but air leaks should be avoided.
  • Page 4 K A P P A ® ENTED NCLOSURE ERFORMANCE DVANTAGES ENTED NCLOSURE ERFORMANCE RADE NFINITY ECOMMENDATION ENTED NCLOSURES • An optimum vented enclosure has greater • Reduced output in the lowest octave 100.9w and 120.9w subwoofers in A vented enclosure acts like a sealed efficiency and higher output in the (below 40Hz).
  • Page 5 NCLOSURE ERFORMANCE NCLOSURE ONSTRUCTION NFINITY ECOMMENDATION NCLOSURES DVANTAGES Band-pass-enclosure construction is more Band-pass enclosures are recommended Band-pass enclosures can provide the difficult than vented-box construction and, only for enthusiasts who want high sound- • An optimum band-pass enclosure provides most output from any amplifier and as with vented enclosures, the design pressure levels (SPL) without regard for higher output over a limited bandwidth...

  • Page 6: Mounting The Subwoofer

    K A P P A ® MOUNTING THE CONNECTING THE The SSI 2-ohm setting increases the SUBWOOFER SUBWOOFER subwoofer’s output over the 4-ohm setting by up to 3dB, depending on the amplifier. The 100.9w and 120.9w subwoofers can be ETTING THE MPEDANCE Performance is identical in all other mounted from the outside of the enclosure...
  • Page 7 ONNECTING THE MPLIFIER 2. Insert wires open the connectors, as shown in the into connector The Kappa 100.9w and 120.9w subwoofer openings illustration to the left. connectors are compatible with bare wire 2. Insert the wire ends into the connector...

  • Page 8: Specifications

    EN 61000-6-1:2001 © 2009 Harman International Industries, Incorporated. All rights reserved. • Part No. REF100.9/120.9SUBOM 3/09 Infinity and Kappa are trademarks of Harman International Industries, Incorporated, registered in the United States Klaus Lebherz and/or other countries. Harman Consumer Group, Inc.

This manual is also suitable for:

Kappa 120.9w

Table of Contents