Table of Contents
Advertisement
7.1.1 Checking the Network Connection
1. Touch
>
Settings.
2. Touch Wireless & networks
3. Touch Network operators or Access Point Names to check the network
connection.
Your mobile phone will automatically read the access point settings from the
SIM/UIM card (if any). For this reason, do not change the access point
parameters; otherwise, you might not be able to access network resources.
7.1.2 Turning on the Data Service
1. Touch
>
Settings.
2. Touch Wireless & networks
3. Select the Data enabled check box to turn on the data connection.
7.2 Wi-Fi
Wi-Fi gives you wireless access to broadband Internet. To use Wi-Fi on your mobile
phone, you must have an access to wireless access points (hotspots). Obstacles that
block the Wi-Fi signal will reduce its strength.
7.2.1 Turning On Wi-Fi
1. Touch
>
Settings.
2. Touch Wireless & networks, and then select the Wi-Fi check box to turn on Wi-Fi.
7.2.2 Connecting to a Wireless Network
1. After turning on Wi-Fi, touch
2. Touch Wireless & networks
networks in the Wi-Fi networks section.
>
Mobile networks
>
Mobile networks.
>
Settings.
>
Wi-Fi settings. You will see a list of detected Wi-Fi
>
Network Settings.
33
Advertisement
Table of Contents
