Samsung DVD-P182 User Manual page 11

Connection to a TV (Progressive)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminal on the rear of the
DVD player to the COMPONENT IN terminal of TV.
2
Using the audio cables, connect the AUDIO (red and
white) OUT terminals of 5.1 CH (Front L-R)on the rear of
the DVD player to the AUDIO (red and white) IN terminals
of TV. Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
4
Set the Video Output to Component (P-SCAN) in the
Display Setup menu. (See pages 27 to 28)
To see the progressive video output,
- Consult your TV User's Manual to find out if your TV supports Progressive Scan. If Progressive
You need a TV set supporting the progressive scan
Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the TV's
input function. And you have to set up the TV
menu system.
- Depending on your TV, the connection method may differ from the illustration above.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method has. Progressive
scanning method can provide better and clearer picture quality.
RED WHITE
Component cable
(not included)
Audio Cable
WHITE
RED
BLUE
GREEN
RED
RED BLUE GREEN
11