Selecting the Turbo Function
You can select the Turbo Function if you want to cool your room in
the fastest way. After the 30 - minute operation with the maximum
setting, it returns to the previous setting.
1
If necessary, press the
N The operation indicator on the indoor unit lights up.
Result:
N The air conditioner starts up in the mode you selected last.
N The indoor unit beeps.
2
Press the
button.
N The temperature and fan settings are adjusted automatically.
Result:
N The fan speed indicator turns round with the maximum setting
and speed.
N The air conditioner cools the room as quickly as possible.
N After 30 minutes, the air conditioner is reset automatically to the
previous setting.
N You can select the Turbo function in the Auto, Cool mode.
If you select this function in the Dry or Fan mode, the mode
changes to the Auto mode.
3
Press the
button again to stop the Turbo Function before the end of the
30-minute period.
Result:
The air conditioner is reset automatically to the previous setting.
4
To control the airflow direction, refer to pages 18 and 19.
(On/Off) button.
Control Panel
13
E-