Washing Step; Washing Program - Samsung WA90GP User Manual

washing a load of laundry

WASHING STEP

Washing step:
1. Open the water tap.
2. Open the washer lid.
3. Put the clothes into washing tub loosely, one by one, don't overload.
4. Pull open the detergent drawer, put suited detergent.
5. Close the washer lid.
6. Press the Power button.
7. Press Program button, repeatedly, to select needful washing program:
Fuzzy,Quick,Delicate,Super Clean,Baby,Jeans,Wool,Blanket,...
8. Press Start/Pause button, the washer begin to run.
After washing finishing:
1. Close the water tap.
2. Pull off the power plug of washer.
3. Open the washer lid.
4. Take out clothes.

WASHING PROGRAM

Before starting washing, check the following:
Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in.
Make sure to lay down the drain hose.
FUZZY PROGRAM
Selects the best washing course automatically.
Power
1. Press the Power button to "On".
2. Press the Start/Pause button.
Water level is selected automatically. Washing rinsing, and spinning follow. If you want to
pause, press the Start/Pause button again. You can change the course when paused.
3. Close the lid.
QUICK PROGRAM
If you want to wash those frequently used towels or less dirty laundry time.
Because washing is speedy, it is good for light or less stained laundry.
Power Program
1. Press the Power button to "On".
2. Press the Program select button once.
3. Press the Start/Pause button.
Water level is selected automatically. Washing rinsing, and spinning follow. If you want to
pause, press the Start/Pause button again. You can change the course when paused.
4. Close the lid.
10_ washing a load of laundry
WA90GP-DC68-02572C-EN-00.indd 10
Start
Pause
Start
Pause
2009-4-30 14:07:15