Viewing The Menus; Important Warranty Information Regarding Television Format Viewing - Samsung CS21A11 Owner's Instructions Manual

Viewing the Menus

1 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
Press the ... or † button to select one of the icons.
2
Press the ENTER button to access the icon's sub-menu.
Press the ... or † button to move to items in the menu.
3
Press the ENTER button to enter items in the menu.
Press the .../†/œ/√ button to change the selected
4
items. Press the MENU button to return to the previous
menu.
5 Press the EXIT button to exit from the menu.
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1 If the television is in standby
mode, press the POWER
button on the remote
Language
control.
English
The Plug & Play is
Français
displayed. It flickers for a
Türkçe
little while, and then
Language menu is
Move
displayed.
2 Select the appropriated
Check antenna input.
language by pressing the
Enter
... or † button. Press the
ENTER button.
The Check antenna input. is displayed.
➢
If any language is not selected, the language menu
will disappear about 30 seconds later.
3 Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Auto Store menu is
displayed with Area
selected.
4 Press the ENTER button again.
Press the ... or † button to select your area. Press the
5
ENTER button.
6 To search the channels,
select Search by pressing
the ... or † button. Press
the ENTER button.
7 Press the ENTER button
again to start search
channels. To stop the
search, press the ENTER
button. When the channel
searching has finished, the
Time menu is displayed
with Clock selected.
Press the œ or √ button to
8
move to the hour or minute.
Set the hour or minute by
pressing the ... or † button.
9 When you have finished,
press the MENU button.
The Enjoy your watching is displayed, and then the
channel which has been stored will be activated.
Re-setting the Plug & Play
Method: MENU ➜ .../†
(Setup) ➜ ENTER ➜ .../†
(Plug & Play) ➜ ENTER
Plug & Play
Input -
Source List / Edit Name
◆ Source List
You can switch between
Enter
viewing signal from
connected equipment, such
as a VCR, DVD, set-top box,
Exit
and the TV source
(broadcast or cable).
➢
You can change the
required external source simply by pressing the
VIDEO button on the remote control. It might take a
continued... short period of time for pictures to be switched. To
return to the TV mode, press the TV button on the
remote control.
TV Auto Store
Area : Belgie ASIA W/EUROPE √ √
CIS E/EUROPE √ √
Search
CHINA
HONGKONG U/K
AUSTRALIA
NZ/INDONESIA
SOUTH AFRICA
AMERICA
Move Enter Return
Search
Start
Enter Return
Search
P 1 C-- ----- 102MHz
7 %
Stop
Enter Return
Time
TV
- - : - - am
Clock
Sleep Timer : Off
On Timer - - : - - am Off
- - : - - am
Off Timer Off
On Timer Volume : 10
Move Enter Return
Enjoy your watching
Setup
TV
√ √
Plug & Play
Language : English
√ √
Time
√ √
Child Lock
√ √
Blue Screen : Off
√ √
Melody : On
√ √
Demonstration
Move Enter Return
Source List
TV
TV
AV1 - - - -
AV2 - - - -
S-Video - - - -
Component - - - -
Move Enter Return
continued...
English - 3
◆ Edit Name
TV
You can give a name to the
AV1
AV2
external source.
S-Video
Component
Move
Important Warranty Information
Regarding Television Format Viewing
Standard screen format televisions (4:3, the aspect ratio of
the screen width to height) are primarily designed to view
standard format full-motion video. The images displayed on
them should primarily be in the standard 4:3 ratio format and
constantly moving. Displaying stationary graphics and
images on screen, such as the dark top and bottom letterbox
bars (wide screen pictures), should be limited to no more
than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the
screen width to height) are primarily designed to view wide
screen format full-motion video. The images displayed on
them should primarily be in the wide screen 16:9 ratio
format, or expanded to fill the screen if your model offers this
feature, and constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-bars
on non-expanded standard format television video and
programming, should be limited to no more than 15% of the
total television viewing per week.
Additionally, viewing other stationary images and text such
as stock market reports, video game displays, station logos,
web sites or computer graphics and patterns, should be
limited as described above for all televisions. Displaying any
stationary images that exceed the above guidelines can
cause uneven aging of picture tubes (CRTs) that leave
subtle, but permanent burned-in ghost images in the
television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images, not
stationary patterns or dark bars. On television models that
offer picture sizing features, use these controls to view the
different formats as a full screen picture.
Be careful in the selection and duration of television formats
used for viewing. Uneven CRT aging as a result of format
selection and use, as well as other burned-in images, is not
covered by your Samsung limited warranty.
Edit Name
- - - -
: Belgie √ √
VCR
√ √
:
DVD
√ √
: Cable STB
Sat. STB
: √ √
AV Recv.
DVD Recv.
Game
Camcorder
DVD Combo
Enter Return