Install Cabinet Toe Plate; Install Cabinet Doors And Cabinet Front Crossbar - Kenmore 119.16658010 Use & Care Manual

Install Cabinet Toe Plate
[] Attach the Cabinet Toe Plate to the Cabinet Bottom Panel using 4 Phillips Head Bolts (M6xlOmm).
[] Place cabinet in upright position on casters.
Phillips Head Bolt M6xl0mm
Qty: 4
Install Cabinet Doors and Cabinet Front Crossbar
[] Insert the Cabinet Right Door bottom pin into the Cabinet Bottom Panel (Inset 1), and insert the
Cabinet Right Door top pin into the Cabinet Front Crossbar (inset 2). With door magnets extending into
the cabinet, attach the Cabinet Front Crossbar to the right side of the Cabinet using 2 Phillips Head Bolts
(M6x35mm) and Plastic washers (M6) (Inset 3). Do not fully tighten bolts at this time.
[] Insert the Cabinet Left Door in the same way and attach Cabinet Front Crossbar to the left side of
the Cabinet using 2 Phillips Head Bolts (M6x35mm) and Plastic Washers (M6). Fully Tighten all 4
Front Crossbar bolts at this time.
Phillips Head Bolt M6x35mm
Qty: 4
Plastic Washer M6
Qty: 4
\
\
\
\
\
\
\
\
\
\
Inset 2 Inset 1 Inset 3