Configuring The Scsi Cable Cage; Removing The Scsi Cable Cage - Acer Altos G700 series User Manual

Configuring the SCSI cable cage

This section includes instructions for removing and installing the SCSI
cable cage as well as procedures on how to install a hard disk into the
cage.
Note: The SCSI cable cage feature is only applicable to the Altos
G700 Basic model.

Removing the SCSI cable cage

1 Turn off the system and all the peripherals connected to it.
2 Unplug all cables from the power outlets.
3 Place the system unit on a flat, stable surface.
4 Detach the chassis panels and remove the air baffle.
5 Loosen the four thumbscrews that secure the cage to the chassis
(1).
6 Slightly pull out the cage from the chassis (2).
7 Disconnect the SCSI cable and the SCSI drive power cable from the
hard disk drive.
8 Pull out the SCSI cable cage from the chassis.
47