Main Function; Analogue Function - Nexus Compass Data Installation And Operation Manual

4.3

Main function

Top data is COMPASS HEADING.
Top data is either magnetic or true HEADING and your choice is set in
the set-up. When magnetic Compass course is selected, the small MAG
sign is lit on the LCD.
4.4

Analogue function

Press the MODE button to change from Compass heading to steer
reference. The LCD arrow will then point at the text STEER instead of
HEADING.
HDC 360 The text HDC 360° means true or magnetic course for the.
LCD pointer in a 360° scale
STR 60 The text STR 60° means that the course deviation is
amplified 3 times and displayed in a 60° scale.
At 360° scale, each sector represent 5° and at 60°scale each sector
2
represent 1 / °.
3
Each sector in Compass mode
represents 5°
OPERATION
Three sectors in steer mode
represents 5° error
14