Polaroid iON 230 User Manual page 9

2. Using an AC Adaptor, via the camera
• Install the battery into the camera.
• Connect the AC adaptor with the Connector.
• Plug the labelled end
camera.
• Connect the adaptor to the household
power outlet.
The battery begins charging and
the battery charge indicator on the
camera blinks. The LED will remain
solid when it finishes charging.
3. Using the Docking Station
• Take the battery out from camera and then place the battery into
the battery charger on the Docking Station.
• Plug the end of the AC Adaptor into the DC Jack on the Docking
Station, and connect the adaptor to the household power outlet.
The battery begins charging and the battery
charge indicator on the camera blinks. The
LED will remain solid when it has finished
charging.
4. Using USB cable via computer
• Install the battery into the camera.
• Plug the labelled end
on your computer.
• Plug the other end of the USB cable into the USB port.
The battery begins charging and the battery charge indicator on
the camera blinks. The LED will remain solid when it finishes
charging.
If you have a Backup Battery (optional - see www.polaroid-digital.com
for more information), both batteries can be charged on the Docking
Station at the same time. Leave one battery in the camera and use
the battery charger slot in the Docking Station to charge the Backup
Battery. Docking Station must be plugged into A/C at the time.
Polaroid iON 230 Digital Camera User Guide
www.polaroid-digital.com
of the Conector into the USB port on the
of the USB cable into the socket marked
9