Hearth and Home Technologies Multifunction Wall Control WSK300 Installation And Operating Instructions Manual page 9

Wall Control - WSK300
Control Specifi cations
Function - PILOT settings
• Press button until
OFF setting is highlighted.
• Normal display will have
no PILOT icons displayed.
Wall Control
• Press button to
set pilot to "ON" for cold
climate setting.
• Pilot "ON" icon will stay
visible on display.
• Pilot fl ame will stay lit
continuously.
• Press button, again,
to set pilot to "OFF". This
will turn off cold climate
setting.
• Pilot "OFF" icon will stay
visible on display for three
seconds.
• Pilot fl ame will only light
when needed to light
burner.
9
MODE set to OFF
PILOT icons will
display
Press PILOT button
• Once the desired PILOT
function is set, continuous
display mode will be
displayed after three
seconds.