Download Print this page
HP Compaq L2206tmp Quickspecs
HP Compaq L2206tmp Quickspecs

HP Compaq L2206tmp Quickspecs

21.5-inch led backlit touch monitor
Hide thumbs Also See for Compaq L2206tmp:

Advertisement

Quick Links

QuickSpecs
Overview
1. Menu
Opens, selects or exits the OSD menu.
2. Minus/Volume
If the OSD menu is on, press to navigate
backward through the OSD menu and decrease
adjustment levels. If the OSD menu is inactive,
press to activate the Volume adjustment menu.
3. Plus/source
If the OSD menu is on, press to navigate forward
through the OSD menu and increase adjustment
levels.
If the OSD menu is inactive, press to activate the
source button that chooses the video signal
input (VGA, DVI, or DisplayPort).
HP Compaq L2206tmp 21.5-inch LED Backlit Touch
DA - 14451 Worldwide — Version 3 — June 24, 2013
4. OK/auto
If the OSD menu is on, press to select the
highlighted menu item.
If the OSD menu is inactive, press to activate the
auto adjustment feature to optimize the screen
image.
5. Power
Turns the monitor on or off.
6. Power LED
Blue = Fully powered.
Amber = Sleep mode.
Flashing Amber = Sleep Timer mode.
Monitor
Page 1

Advertisement

loading

Summary of Contents for HP Compaq L2206tmp

  • Page 1 HP Compaq L2206tmp 21.5-inch LED Backlit Touch QuickSpecs Monitor Overview 1. Menu Opens, selects or exits the OSD menu. 4. OK/auto If the OSD menu is on, press to select the highlighted menu item. If the OSD menu is inactive, press to activate the auto adjustment feature to optimize the screen image.
  • Page 2 Overview The HP Compaq L2206tmp is a 21.5-inch LED backlit touch screen monitor with an integrated privacy filter built right in. Keep sensitive information private without diminishing touch functionality and screen readability. The privacy filter limits the horizontal viewing area to 30°...
  • Page 3: Technical Specifications

    (to half brightness) Color Gamut Over 16 million colors (through FRM) Color Gamut (typical) *All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. On Screen Display Buttons or Switches "Menu"...
  • Page 4 HP Compaq L2206tmp 21.5-inch LED Backlit Touch QuickSpecs Monitor Technical Specifications Default Color Temperature Standard (6500K) Touchscreen Touch Technology/interface Optical Multitouch/USB Specification Multitouch 2 unambiguous points Touch Point Response <8.3ms with dual simultaneous touches Accuracy << ± 2.5mm @ 95% area for 21.5 inches (16:9) LCD...
  • Page 5: Additional Information

    This product is in compliance with the Restrictions of Hazardous Substances (RoHS) directive - 2002/95/EC. Information This HP product is designed to comply with the Waste Electrical and Electronic Equipment (WEEE) Directive - 2002/96/EC. This product is in compliance with California Proposition 65 (State of California; Safe Drinking Water and Toxic Enforcement Act of 1986).
  • Page 6 RoHS Directive, except where it is widely recognized that there is no technically feasible alternative (as indicated by an exemption under the EU RoHS Directive). Material Usage This product does not contain any of the following substances in excess of regulatory limits (refer to the HP General Specification for the Environment at http://www.hp.com/hpinfo/globalcitizenship/environment/supplychain/gen_specifications.html):...
  • Page 7 Part number EM870AA HP Integrated Work Allows mounting of a 17 - 24 inch diagonal HP LCD monitor and an HP Compaq dc8000 series Ultra-slim Desktop PC as well as select HP Thin Clients on a Center Stand - USDT and single stand for the convenience of an "all-in-one"...
  • Page 8 Compatible with platforms using the VESA standard video modes. Recommended for use with HP products. Service and Warranty Protected by HP, including a 3 year standard limited warranty. Optional Care Pack Services are extended service contracts which go beyond your standard warranties.2 DA - 14451 Worldwide — Version 3 — June 24, 2013...
  • Page 9 ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the VESA-compliant screws).