PEUGEOT 308 Handbook page 124

6
FITTINGS
High load retaining net
Hooked onto the special upper and lower
fi xings, this permits use of the entire load-
ing volume up to the roof behind the seats
of the 2nd row.
i
When positioning the net, check
that the strap loops are visible from
the boot; this will make slackening
or tightening easier.
122
To use the net in the 2nd row (additional
seats folded or removed):
roll up or remove the load space
screen,
open the covers of the upper fi xings 1 ,
unroll the high load retaining net,
position one of the ends of the net's
metal bar in the corresponding upper
fi xing 1 , then do the same with the
other end,
attach the snap hook of each of the
net's straps in the corresponding
ring 2 , located on the lower fi xing of
the rear side seat belt,
tighten the straps,
check that the net is hooked and
tightened correctly.
12 V accessory socket
To connect a 12 V accessory (max
power: 120 W), remove the cap and
connect an appropriate adaptor.
Turn the key to the ignition on
position.
Hooks
The hooks can be used to hold shop-
ping bags.