Deleting The Program Timer; Invalidating Program Timer - Panasonic CZ-RTC2 Instruction Manual

• Deleting the Program Timer

To delete the program timer setting, follow the steps below.
1. Press to enter the program confi rmation mode.
2. Press /
program you want to delete.
3. Press / to select a TIMER No. (from 1 to 6).
4. Press to display the program setting mode
5. Press to delete the program.
Note
• After deleting, the unit returns to the program confi rmation
mode .
• If you press during the setting, the unit returns to the
program comfi rmation mode.
• If there is no operation made for 3 minutes during the setting, the unit returns to the normal mode.

• Invalidating Program Timer

If you want to adjourn the program operation for more than 1 week, you can invalidate all the timer settings.
Once the timer settings are invalidated, the program will not be operated until the invalidation is cancelled.
<<How to invalidate the program timer>>
Press and hold
is displayed and the programs will be invalidated from the next one.
<<How to cancel the program timer invalidation>>
Press and hold
disappears and the programs will be validated from the next one.
If Power Failure Occurred
If the power recovers in a short time period, the program after the recovered time will be valid.
If the power recovered more than 1 hour after the failure, the present time information will be lost. In this
case, the program will not be operated.
to select the day of the
for more than 2 seconds.
for more than 2 seconds.
.
5
EN-9
3 4 1 2
EN