Table of Contents
Advertisement
Do not turn the TV off, pull out the mains plug or remove the USB HDD
●
during operation (formatting, recording, etc.). Doing so may cause
malfunction of the device or damage the recorded data. (An electric
outage may also be a cause of malfunction.)
= Note =
Analogue TV programme cannot be recorded on the USB HDD.
●
The data broadcasting (MHEG, etc.), radio broadcasting will not be
●
recorded, and also the recording function will not work during the period
without any signal.
Not all the programmes can be recorded depending on the broadcaster
●
and service provider.
You cannot copy the recorded contents of the USB HDD.
●
For more information of the USB HDD
●
Recording
Setting for USB HDD
Format and set up the USB HDD with this TV in order to use it for recording.
All the USB devices recognised as a mass storage device will be listed.
Please note that USB HDD will be formatted and all data in it will be
●
erased after this setup.
Before setting, connect the USB HDD and be sure to turn on the USB
●
HDD.
Recording
1. Display the menu with
2. Select
Setup
USB Device Setup
3. Select the USB HDD for recording with
Some USB HDD may not be displayed.
●
To display information of the highlighted device
●
INFO
4. When the caution and confirmation screen for using USB HDD is
displayed, select
Technical information
USB HDD setup
Preparations
MENU
with
Yes
with
/
and press
- 58 -
USB HDD
/
and press
OK
/
and press
OK
OK
to proceed
to access
to start setup
Hide quick links:
Advertisement
Table of Contents
