Shooting With The Fe Lock; Changing The Flash Timing - Canon PowerShot S120 User Manual

Shooting with the FE Lock

Just as with the AE lock (= 71), you can lock the exposure for the flash
shots.
1
Raise the flash and set it to [h]
(=
2
Lock the flash exposure.
z z
Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<o> button.
z z The flash fires, and when
[
retained.
z z
To unlock FE, release the shutter button
and press the < o > button again. In this
case, [
3
Compose the shot and shoot.
z z
After one shot, FE is unlocked and [
no longer displayed.
•
FE Lock cannot be used with Touch Shutter
(= 86), because touching the screen will cancel FE Lock.
•
FE: Flash Exposure
Still Images
87).
] is displayed, the flash output level is
] is no longer displayed.
(= 39) or Touch AF

Changing the Flash Timing

Change the timing of the flash and shutter release as follows.
The flash fires immediately after the shutter opens.
1st-curtain
The flash fires immediately before the shutter closes.
2nd-curtain
] is
Still Images
1
Access the setting screen.
z z
Press the <n> button, choose [Flash
Settings] on the [4] tab, and then press
the <m> button (= 25).
2
Configure the setting.
z z
Choose [Shutter Sync.], and then choose
the desired option (= 26).
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting
Modes
4
P Mode
5
Tv, Av, M, and
C Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
89