User Comment; Show Signal States - Siemens SISTORE MX User Manual

Display mode functions
10.4

User comment

10.5

Show signal states

36
Siemens Building Technologies
Fire Safety & Security Products
You can add comments to the logbook at any time. This function is also available
in SISTORE MX RemoteView.
1. Select User comment in the Action menu.
– OR –
Press the key combination <ALT+ L>.
The following dialog box will appear:
Fig. 14 SISTORE MX logbook comment
2. Enter a comment and click OK.
The comment will be saved to the logbook together with the user name.
The signal states of the cameras, alarm inputs, alarm outputs and digital inputs can
be displayed on the server.
To do this select Signal state... in the Action menu.
The meaning of the symbols is as follows:
Symbol Meaning
Motion detected by camera
Signal loss on camera
Tamper event detected by camera
Active alarm input
(LED light-red)
Active alarm output
(LED light-
green)
Active digital input
(LED light-
blue)
Alarm outputs that are remotely controllable can be activated/deactivated by
double clicking the corresponding LED.
01.2008