Lenovo 3569 Maintenance Manual page 110

7. Remove the microprocessor. See "Replacing the microprocessor" on page 92.
8. Remove the memory modules. See "Installing or replacing a memory module" on page 99.
9. Remove the battery. See "Replacing the battery" on page 97.
10. Remove the rear I/O assembly to gain access to the system board. See "Replacing the rear I/O
assembly" on page 85.
11. Note the locations of all cable connections on the system board and disconnect all cables. See
"Locating parts on the system board" on page 72.
12. Remove the seven screws that secure the system board to the main bracket. Carefully lift the system
board out of the chassis.
Figure 41. Removing the seven screws that secure the system board to the main bracket
13. Place the new system board into the chassis and align the screw holes with those in the chassis.
14. Reinstall the seven screws that secure the system board to the main bracket.
15. Reinstall the rear I/O assembly. See "Replacing the rear I/O assembly" on page 85.
16. Reinstall the battery. See "Replacing the battery" on page 97.
17. Reinstall the memory modules. See "Installing or replacing a memory module" on page 99.
18. Reinstall the microprocessor. See "Replacing the microprocessor" on page 92.
19. Reinstall the heat sink assembly. See "Replacing the heat sink assembly" on page 90.
20. Reinstall the system board shield. See "Removing and reinstalling the system board shield" on page 87.
21. Reconnect all cables that were disconnected from the system board. See "Locating parts on the
system board" on page 72.
22. Go to "Completing the parts replacement" on page 111.
The failing system board must be returned with a microprocessor socket cover to protect the pins during
shipping and handling.
104
ThinkCentre Edge Hardware Maintenance Manual