Table of Contents
Advertisement
5-10 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
Gigabit LAN port, one LED indicates
activity when blinking while the other
LED may be green, amber or off to
indicate the speed of the connection.
See the table on the right for the func-
tions associated with the connection
speed LED.
LE1
The LE1 LED located near JD1 is
the power LED. LE1 illuminates when
the serverboard is powered up and
operating.
LE2
The LE2 LED located under SW1 is
the UID indicator LED. LE2 illuminates
when UID is initiated either by the UID
button or via IPMI. If initiated a second
time, LE2 will turn off.
When the LED blinks blue it means the
signal was initiated via IPMI. If blue
continuously it means the UID button
initiated it.
Chapter 5: Advanced Serverboard Setup
LAN LED
Connection Speed Indicator
LED Color
Off
Green
Amber
5-21
Defi nition
10 MHz
100 MHz
1 GHz
Advertisement
Table of Contents
