Dhcp Lease (Router Mode Only) - Buffalo WCR-G300 User Manual

Chapter 3 Configuration

DHCP Lease (Router Mode only)

Configure DHCP leasing here.
Parameter
IP Address
MAC Address
Current DHCP Client Information
WCR-G300 / WCR-HP-G300 User Manual
Meaning
Enter an IP address to lease manually. The IP address should be
from the same subnet as the DHCP scope, but not be within the
range that DHCP is assigning to other devices.
Enter the MAC address which identifies the client.
Displays information for current leases. An IP address which is
leased automatically can be changed to be leased manually by
clicking [Manual Assignment].
31