Read the instructions and keep them safe. If you pass the iron on, pass on the instructions too. Remove all packaging, but keep it till you know the iron works. important safeguards Follow basic safety precautions, including: 1 The iron must only be used by or under the supervision of a responsible adult. Use and store it out of reach of children.
18 Don’t use the iron for any purpose other than those described in these instructions. 19 Take care not to scratch the soleplate – avoid buttons, zips, etc. 20 The iron has a protective thermal fuse, which will blow if it overheats. If this happens, the iron will stop working, and must be returned for repair.
temperature setting guide label marking temperature dot setting display j cool – nylon, acrylics, polyester SYNTHETIC • WOOL k warm – wool, polyester mixtures SILK • • l hot – cotton, linen COTTON • • • LINEN i do not iron , If the instructions on the fabric label differ from this guide, follow the instructions on the label.
shot of steam 28 Don’t Use the shot of steam function at temperatures below COTTON on the display. At lower temperatures, you’ll only get water spotting. 29 Check that there’s water in the reservoir. 30 Lift the iron off the fabric 31 Press the H button.
self clean 55 To prevent scale building up, use the self clean function regularly, at least monthly in normal water areas, more often in hard water areas. 56 You’ll need a basin or a large bowl to catch the water coming out of the soleplate. 57 Fill the reservoir to the max mark.
connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.