Ford Town Car 2009 Owner's Manual page 40

Lights
film of mist can form on the interior of the lens. The thin mist eventually
clears and exits through the vents during normal operation. Clearing
time may take as long as 48 hours under dry weather conditions.
Examples of acceptable condensation are:
• Presence of thin mist (no streaks, drip marks or droplets)
• Fine mist covers less than 50% of the lens
Examples of unacceptable moisture (usually caused by a lamp water
leak) are:
• Water puddle inside the lamp
• Large water droplets, drip marks or streaks present on the interior of
the lens
Take your vehicle to dealer for service if any of the above conditions of
unacceptable moisture are present.
Using the right bulbs
Replacement bulbs are specified in the following chart. Headlamp bulbs
must be marked with an authorized "D.O.T." for North America and an
"E" for Europe to ensure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs will not damage the lamp assembly
or void the lamp assembly warranty and will provide quality bulb burn
time.
Function
Headlamp (HI beam)
Headlamp (LOW beam)*
Park and turn lamp (front)
Sidemarker (front)
Backup lamp
Stop, tail, turn and sidemarker lamp (rear)
Cornering lamp
License plate lamp
High-mount brakelamp - Stop**
Luggage compartment lamp
Map lamp
Visor vanity lamp - Slide on Rail system
(SOR)
40
2009 Town Car (tow)
Owners Guide, 1st Printing
USA (fus)
Trade Number
9005
H7
3457 AK
168
3156 K
3157 K
3156 K
168
LED assembly
212-2
578
A6224PF